Challenges and Benefits of VRS

Challenges and Benefits of VRS

The main purpose of a VRS station is to reduce the baseline distance between the rover and the reference station in order to efficiently remove spatially correlated errors using differential processing, and to incorporate error corrections obtained from the reference stations network.

Although the VRS approach generally provides an overall improvement relative to single reference station systems, it poses some challenges. First is a dependence of the VRS service on a communication system, such as the mobile phone network.

Moreover this technique requires a bi-directional communication link between the receiver and the computation center, because the rover has to send information about its current position and has to receive the VRS data. This telecommunication link must provide high bandwidth communication between all the elements of system: the reference stations, the master control center, and the user receiver.


A second challenge is that errors can be generated by different tropospheric and stratospheric models applied between the computation center and the rover. Because the initial position provided by the rover to generate the VRS data is not usually precise, especially in height, the troposphere error computed by the network will not be perfect, with every 10 meters of initial height error yielding up to 0.2 millimeters of error from the troposphere model.

Topospheric Error

VRS concept basically needs the resource of a physical GPS network surrounding the measurement area of the rover, with a minimum of three reference stations to enable the modeling of errors. However, the estimation accuracy increases as more physical reference stations are added to the network, especially as the number of stations exceeds five, at which point the increased redundancy and improved network geometry provide more accurate error modeling.

The Automated GNSS Network for Switzerland (AGNES) as of 2011

The Automated GNSS Network for Switzerland (AGNES) as of 2011


To conduct a survey employing a VRS network, the physical stations themselves must be installed over stable sites, preferably distributed homogeneously over the operational area. If possible, the antennas must be fixed in bedrock to ensure long term stability of the receiver’s position.

Fortunately, obtaining a 10-meter height error is quite reasonable in most applications involving carrier phase data, meaning the resulting troposphere modeling errors will usually be small.

Using the VRS technique, highly improved RTK positioning can be performed inside the network area. The precision of RTK positioning using VRS reaches two centimeters in the horizontal plane and four centimeters in the vertical direction.

The VRS concept allows a less dense antenna network without accuracy degradation because the multiple reference station network better models the spatially correlated GNSS errors over longer baselines. As a result the maximum distance between the rover and the nearest reference station can be extended in comparison with the typical 10 ~15 kilometers without accuracy degradation of the single reference station case.


Another benefit of a VRS is that the reference data are free of site-specific errors such as multipath, because the VRS computation assumes that the virtual station is situated at an ideal location. On the rover side the principal gains from the VRS principle are the use of common double-difference algorithms and the simplicity of computation, because the user does not need to perform any complex error modelling because this is being done already within the network.


In next post I will discuss about Various Error that can be Reduced using VRS.

Related Topics:

What is Virtual Reference Station?

How Virtual Reference Station Works?

Also Read – GPS Field Observation and Data Processing

Categories: Geodesy

About Author

GIS Resources

GIS Resources is an initiative of Spatial Media and Services Enterprises with the purpose that everyone can enrich their knowledge and develop competitiveness. GIS Resources is a global platform, for latest and high-quality information source for the geospatial industry, brings you the latest insights into the developments in geospatial science and technology.

Write a Comment

Your e-mail address will not be published.
Required fields are marked*

This site uses Akismet to reduce spam. Learn how your comment data is processed.